Comparison of the Diatheva STEC FLUO with BAX System Kits for Detection of O157:H7 and Non-O157 Shiga Toxin-Producing <Emphasis Type="Italic">Escherichia coli</Emphasis> (STEC) in Ground Beef and Bean Sprout Samples Using Different Enrichment Protocols

The aim of this study was to assess the performance of the Diatheva STEC FLUO and BAX System real-time PCR assays for detection of Shiga toxin-producing Escherichia coli (STEC) (stx1/stx2 and eae target genes) and O-group identification in ground beef and bean sprout samples. Ground beef (325 g or 25 g) and mung bean sprout (25 g) samples were inoculated with ~?10 CFU of the “top five” STEC (O157:H7, O26, O103, O111, and O145 as specified in EU regulation ISO13136:2012), enriched using different broths and incubation temperatures, and tested using the Diatheva and BAX real-time PCR assays. In ground beef, both molecular methods were able to detect the “top five” STEC, and lower Ct values were observed for the Diatheva kits compared to BAX System. The O111-contaminated samples gave negative results with both methods using mTSB?+?novobiocin for enrichment. In bean sprouts, both methods provided positive results, although detection was not possible using mTSB?+?acriflavin/cefsulodin/vancomycin for enrichment. In conclusion, the Diatheva and BAX methods detected the “top five” STEC in ground beef and bean sprouts when inoculated at low levels. Both assays provided equivalent results in terms of performance and reliability. Thus, the Diatheva kits are comparable to reference STEC-detection methods and could be used by the food industry to reliably detect the “top five” STEC.     

Controlled continuous patterning of polymeric nanofibers on three-dimensional substrates using low-voltage near-field electrospinning

We report on a continuous method for controlled electrospinning of polymeric nanofibers on two-dimensional (2D) and three dimensional (3D) substrates using low voltage near-field electrospinning (LV NFES). The method overcomes some of the drawbacks in more conventional near-field electrospinning by using a superelastic polymer ink formulation. The viscoelastic nature of our polymer ink enables continuous electrospinning at a very low voltage of 200 V, almost an order of magnitude lower than conventional NFES, thereby reducing bending instabilities and increasing control of the resulting polymer jet. In one application, polymeric nanofibers are freely suspended between microstructures of 3D carbon on Si substrates to illustrate wiring together 3D components in any desired pattern.     

Piezoelectric potential in vertically aligned nanowires for high output nanogenerators

In this work we analyze the coupled piezoelectric and semiconductive behavior of vertically aligned ZnO nanowires under uniform compression. The screening effect on the piezoelectric field caused by the free carriers in vertically compressed zinc oxide nanowires (NWs) has been computed by means of both analytical considerations and finite element calculations. We predict that, for typical geometries and donor concentrations, the length of the NW does not significantly influence the maximum output piezopotential because the potential mainly drops across the tip, so that relatively short NWs can be sufficient for high-efficiency nanogenerators, which is an important result for wet-chemistry fabrication of low-cost, CMOS- or MEMS-compatible nanogenerators. Furthermore, simulations reveal that the dielectric surrounding the NW influences the output piezopotential, especially for low donor concentrations. Other parameters such as the applied force, the sectional area and the donor concentration have been varied in order to understand their effects on the output voltage of the nanogenerator.     

Molecular Ordering at the Interface Between Liquid Water and Rutile TiO2(110)

The pivotal importance of TiO₂ as a technological material involves most applications in an aqueous environment, but the single‐crystal TiO₂/bulk‐water interfaces are almost completely unexplored, since up to date solid/liquid interfaces are more difficult to access than surfaces in ultrahigh vacuum (UHV). Only a few techniques (as scanning probe microscopy) offer the opportunity to explore these systems under realistic conditions. The rutile TiO₂(110) surface immersed in high‐purity water is studied by in situ scanning tunneling microscopy. The large‐scale surface morphology as obtained after preparation under UHV conditions remains unchanged upon prolonged exposure to bulk water. Moreover, in contrast to UHV, atomically resolved images show a twofold periodicity along the [001] direction, indicative of an ordered structure resulting from the hydration layer. This is consistent with density‐functional theory based molecular dynamics simulations where neighboring interfacial molecules of the first water layer in contact with the bulk liquid form dimers. By contrast, this dimerization is not observed for a single adsorbed water monolayer, i.e., in the absence of bulk water.     

Excretion of Avenanthramides,Phenolic Acids and their Major Metabolites Following Intake of Oat Bran

1 Scope

Wholegrain has been associated with reduced chronic disease mortality, with oat intake particularly notable for lowering blood cholesterol and glycemia. To better understand the complex nutrient profile of oats, we studied urinary excretion of phenolic acids and avenanthramides after ingestion of oat bran in humans.

2 Methods and results

After a 2‐d (poly)phenol‐low diet, seven healthy men provided urine 12 h before and 48 h after consuming 60 g oat bran (7.8 μmol avenanthramides, 139.2 μmol phenolic acids) or a phenolic‐low (traces of phenolics) control in a crossover design. Analysis by ultra‐high performance liquid chromatography (UPLC)–MS/MS showed that oat bran intake resulted in an elevation in urinary excretion of 30 phenolics relative to the control, suggesting that they are oat bran‐derived. Mean excretion levels were elevated between 0–2 and 4–8 h, following oat bran intake, and amounted to a total of 33.7 ± 7.3 μmol total excretion (mean recovery: 22.9 ± 5.0%), relative to control. The predominant metabolites included: vanillic acid, 4‐ and 3‐hydroxyhippuric acids, and sulfate‐conjugates of benzoic and ferulic acids, which accounted collectively for two thirds of total excretion.

3 Conclusion

Oat bran phenolics follow a relatively rapid urinary excretion, with 30 metabolites excreted within 8 h of intake. These levels of excretion suggest that bound phenolics are, in part, rapidly released by the microbiota.     

The effect of different dietary treatments on volatile organic compounds and aromatic characteristics of buffalo Mozzarella cheese

The objective of this study was to evaluate the effect of two dietary treatments, ryegrass hay (RH) and wrapped ryegrass silage (WRS) on the volatile organic compounds (VOCs) of buffalo Mozzarella cheese. The primary data were collected from 40 female buffaloes. Twenty animals were fed RH, and other twenty received WRS. Volatile organic compounds were identified using a mass selective detector after extraction with a ‘purge and trap’ system and a gas chromatographic analysis. Our results showed differences in the aromatic profile of Mozzarella cheese samples obtained from buffaloes receiving different feed. In particular, 5 VOCs allowed the discrimination between cheese samples.     

An overview of poly(vinyl alcohol) and poly(vinyl pyrrolidone) in pharmaceutical additive manufacturing

Recently, drug personalization has received noticeable attention. Problems arising from standard generalized drug treatments have aroused over the years, particularly among pediatric and geriatric patients. The growing awareness of the limitations of the “one-size-fits-all” approach has progressively led to a rethinking of the current medicine's development, laying the basis of personalized medicine. Three-dimensional printing is a promising tool for realizing personalized therapeutic solutions fitting specific patient needs. This technology offers the possibility to manufacture drug delivery devices with tailored doses, sizes, and release characteristics. Among additive manufacturing techniques, fused deposition modeling (FDM) is the most studied for oral drug delivery device production due to its high precision and cheapness. By playing with factors such as drug loading method, filament production, and printing parameters, the medication release profile of a drug delivery device produced by 3D printing can be tailored depending on the patient's requirements. This review focuses on the applications of FDM in drug fabrication using poly(vinyl alcohol) (PVA) and poly(vinyl pyrrolidone) (PVP) as drug-loaded matrices. The authors aim to provide an overview of the current trends in this research field, with special attention to the effect of the printing parameters, tablet shape, and drug distribution and concentration on drug customization and personalized drug release.     

The Brazilian Amazonian rainforest harbors a high diversity of yeasts associated with rotting wood,including many candidates for new yeast species

This study investigated the diversity of yeast species associated with rotting wood in Brazilian Amazonian rainforests. A total of 569 yeast strains were isolated from rotting wood samples collected in three Amazonian areas (Universidade Federal do Amazonas-Universidade Federal do Amazonas [UFAM], Piquiá, and Carú) in the municipality of Itacoatiara, Amazon state. The samples were cultured in yeast nitrogen base (YNB)-d -xylose, YNB-xylan, and sugarcane bagasse and corncob hemicellulosic hydrolysates (undiluted and diluted 1:2 and 1:5). Sugiyamaella was the most prevalent genus identified in this work, followed by Kazachstania. The most frequently isolated yeast species were Schwanniomyces polymorphus, Scheffersomyces amazonensis, and Wickerhamomyces sp., respectively. The alpha diversity analyses showed that the dryland forest of UFAM was the most diverse area, while the floodplain forest of Carú was the least. Additionally, the difference in diversity between UFAM and Carú was the highest among the comparisons. Thirty candidates for new yeast species were obtained, representing 36% of the species identified and totaling 101 isolates. Among them were species belonging to the clades Spathaspora, Scheffersomyces, and Sugiyamaella, which are recognized as genera with natural xylose-fermenting yeasts that are often studied for biotechnological and ecological purposes. The results of this work showed that rotting wood collected from the Amazonian rainforest is a tremendous source of diverse yeasts, including candidates for new species.     

Cross-Batch Contamination in a Continuous Horizontal Decanter Centrifuge during Virgin Olive Oil Production

Cross-batch contamination in a decanter centrifuge during virgin olive oil production cannot be avoided using current technology. The extent of this contamination is investigated using industrial-scale tests, by measuring the volatile profile and color on three consecutive oil batches, collected at the decanter outlet at different extraction times. The extent of contamination varied, pointing out qualitative consequences, as defective molecules are found. The latter are often active at low concentrations, and the measured cross-batch contamination can lead both to the downgrading of large batches of virgin olive oils and to the adulteration of monovarietal and certified productions. An innovative method, based on the direct determination of the color (L and a* coordinates) of oil at the outlet of the decanter is able to identify the same compositional change point indicated by gas chromatography, and could be successfully used to mitigate the effects of cross-batch contamination. Practical applications: An in-line colorimetric system can be implemented at the decanter outlet to detect the point of change between different olive batches. Otherwise, the virgin olive oil exiting from the decanter at the beginning of one batch can be collected separately in order to avoid the contamination due to the previous batch.